|
 |
 |
 |
 |
|
Ductile Iron Flange for R6904, R6905, and R6906 |
 |
|
Installation |
|
Convert To Metric Units
|
Size
(in.) |
D |
E |
F |
G |
H |
Flange
Thickness |
J |
Bolt Size** for
connecting Expansion
Joints to CPI & HVAC |
| Holes |
Thread |
B.C.* |
Holes |
Thread |
B.C.* |
B.C. |
Class 125 & 150
ANSI Flanges*** |
| 1 |
4 |
1/2-13 |
3 1/8 |
4 |
5/16-18 |
3 1/8 |
1/4 |
5 1/8 |
4 1/4 |
5/16 |
6 |
1/2 - 13 x 1 |
| 1 1/2 |
13 7/8 |
3 7/8 |
5 7/8 |
5 |
11/32 |
6 3/4 |
1/2 - 13 x 1 1/4 |
| 2 |
5/8-11 |
4 3/4 |
4 3/4 |
3/8 |
6 7/8 |
6 |
7/16 |
8 1/2 |
5/8 - 11 x 1 1/2 |
| 2 1/2 |
5 1/2 |
- |
- |
- |
8 1/8 |
7 |
1/2 |
9 3/8 |
5/8 - 11 x 1 3/4 |
| 3 |
6 |
4 |
5/16-18 |
6 |
8 3/4 |
7 1/2 |
10 |
5/8 - 11 x 1 3/4 |
| 4 |
8 |
7 1/2 |
8 |
7 1/2 |
9 7/8 |
9 |
5/8 |
11 1/8 |
5/8 - 11 x 2 |
| 5 |
3/4-10 |
8 1/2 |
- |
- |
- |
1/2 |
11 1/2 |
10 |
3/4 |
13 |
3/4 - 10 x 2 |
| 6 |
9 1/2 |
8 |
3/8-16 |
9 1/2 |
12 1/2 |
11 |
14 |
3/4 - 10 x 2 |
| 8 |
11 3/4 |
- |
- |
- |
14 3/4 |
13 1/2 |
15/16 |
16 1/4 |
3/4 - 10 x 2 1/2 |
| 10 |
12 |
7/8-9 |
14 1/4 |
17 1/2 |
16 |
1 |
19 |
7/8 - 9 x 2 1/2 |
| 12 |
17 |
5/8 |
20 1/2 |
19 |
22 |
7/8 - 9 x 2 1/2 |
| 14 |
1-8 |
18 3/4 |
CF |
24 11/64 |
21 |
1 3/16 |
27 5/16 |
CF |
| 16 |
16 |
21 1/4 |
27 9/16 |
23 1/2 |
31 1/2 |
| 18 |
1 1/8-7 |
22 3/4 |
29 |
25 |
32 29/32 |
| 20 |
20 |
25 |
31 1/2 |
27 1/2 |
35 7/16 |
| 24 |
1 1/4-7 |
29 1/5 |
35 29/32 |
32 |
1 11/32 |
39 27/32 |
All Dimensions in inches.
* Bolt circle same as 125 and 150 lb. ANSI standard.
** Add bolt diameter to length for stud bolts.
*** Lap-joint flanges may require 1/4" longer bolt in some instances.
CF = Consult Factory
Warning: If components show significant deterioration to abrasion,
damage, or corrosion, the assembly should be removed from service. Failure
to periodically perform inspection for abrasion, damage, or corrosion may
lead to failure and/or rupture of the assembly resulting in property
damage, serious personal injury, or death. |
Bolt Torque Information
Bolts should be tightened using the following torques as a guide and with well lubricated threads.
Nominal Expansion Joint
Size (inches) |
1 |
1 1/2 |
2 |
2 1/2 |
3 |
4 |
5 |
6 |
8 |
10 |
12 |
Flange Bolt Torque
ft.-lbs. |
10 |
15 |
25 |
30 |
40 |
30 |
40 |
60 |
75 |
70 |
75 |
No. of Holes
Per Flange |
4 |
4 |
4 |
4 |
4 |
8 |
8 |
8 |
8 |
12 |
12 |
| Note: The values in this table are a guide. In some instances, higher torque may be required. However, excessive torque should be avoided. Do not exceed twice the given values. |
 |
 |
 |
"This page is a machine translation of the source page, which is written in
English. This translation is intended to provide a general idea of the
page's content, and is not guaranteed for accuracy."
|
|
|
|
